Table of Contents
Advertisement
CD-ROM drive is not recognized
Reason
CD-ROM drive power cable not attached.
CD-ROM EIDE drive cable not attached.
Total amount of memory does not display
Reason
Faulty DIMM(s).
DIMM(s) not properly seated into
socket(s).
I/O Card parity error message displays
Reason
Faulty option board is installed in ISA slot.
Video
System is powered on, but screen remains blank
Reason
Monitor not powered on.
Monitor power cord not connected.
Video cable not properly installed.
Graphics card not seated properly.
Selected resolution is not supported by the
monitor.
Improper video display driver installed.
Solution
Open the base unit and ensure power cable is
properly attached. See the System Reference.
Open the base unit and ensure cable is properly
attached. See the System Reference.
Solution
Identify faulty DIMM(s) by swapping DIMM(s)
until the faulty one is found. See the System
Reference.
Ensure DIMM(s) are properly installed. See the
System Reference.
Solution
Remove ISA board, then restart the system. See the
System Reference.
Solution
Turn on power to the monitor.
Connect monitor power cord to AC outlet and
monitor.
Ensure video cable is connected to monitor and
system video out connector.
Open the base unit and re-seat graphics card. See
the System Reference.
Select a supported resolution. See the graphics card
documentation and
README
details.
See graphics card documentation and
file for instructions; install a valid driver.
65
.
file for resolution
TXT
.
README
TXT
Advertisement
Table of Contents
Need help?
Do you have a question about the StudioZ GT RAX and is the answer not in the manual?
Questions and answers