Table of Contents
Advertisement
60
Updating the System BIOS
The system's BIOS can be reprogrammed using a BIOS file. You can update the BIOS by
following the steps below:
3.
Download the appropriate BIOS file from Intergraph's BBS, or from the Support pages on the
World Wide Web (http://www.intergraph.com/ics/).
4.
Extract the BIOS file to a bootable MS-DOS 6.X diskette.
5.
Reboot your system with the MS-DOS 6.X diskette in the floppy drive. To make sure a clean
DOS environment is loaded, press the
displayed. After the system has restarted, the cursor displays the A:> prompt.
6.
Now you can run the
.
README
TXT
7.
After the update process has completed and the system reboots, verify that the new BIOS
version appears onscreen.
utility from the bootable floppy disk. Refer to the
FLASHPROG
file included with the BIOS update for detailed instructions.
key while the message Starting MS-DOS is
F5
Advertisement
Table of Contents
Need help?
Do you have a question about the StudioZ GT RAX and is the answer not in the manual?
Questions and answers