Configuring The Sound Driver - Intergraph StudioZ GT RAX Setup Manual

Do the following after installation of the operating system:
Install drivers or other system software from any backup diskettes. System software delivered
on backup diskette is usually more current than system software on the operating system CD-
ROM. Alternatively, you can install the drivers or other system software from the Windows
NT CD-ROM if you do not have them on diskette.
If your system has a QLogic Fibre Channel host bus adapter, run
diskette to install the driver. See the
information.
Perform any additional installation and configuration tasks described in the Late-Breaking
News document delivered with your system.
Configure the system as described in Chapter 3, "Configuring the System."
If your system was running Windows NT 4.0 Service Pack software, install this software after
installing drivers and other system software, and after installing any application software
products.
Perform any operational changes required for your system as described in Chapter 4,
"Operating Notes."
Do the following after you install Windows NT Service Pack software:
If you created a Quick-Fix Engineering (QFE_NT*) backup diskette from Version Manager
during any previous initial system configuration, install the QFE update software. See the
.
README TXT
On a system with a Pentium III processor, reinstall Intel's Streaming SIMD Extension Driver,
delivered in the
for drivers and applications designed to take advantage of it. If
of the Intergraph System CD-ROM, you can get it from the Support pages on the World Wide
Web (http://www.intergraph.com/ics). See the
more information.
Complete the additional installation and configuration tasks in this section.

Configuring the Sound Driver

If you reinstall Windows NT and the associated system software and have an MPU-401 device or a
joystick, you must also install the appropriate drivers.
To install a compatible MPU-401 device driver:
1. Click Start, click Settings, and then click Control Panel.
2. Double-click Multimedia and click the Devices tab.
3. Click Add. The Add Driver dialog box displays.
README
file on the QFE diskette for more information.
_ system software product. This driver increases system performance
QFE SSE
SETUP
. file on the backup diskette for more
TXT
_
QFE SSE
. file delivered with
README TXT
73
. from the backup
EXE
is not on your copy
_ for
QFE SSE