Intergraph StudioZ GT RAX Setup Manual page 65

PCI Device, Embedded Audio
This option displays choices for configuring the features of the embedded Audio device.
Entry
Onboard Sound
Controller
Enable Master
Latency Timer
PCI INTA IRQ
Mapping
AGP Device
This option displays additional options for configuring the features of the AGP device.
Entry
AGP Controller
Option ROM Scan
Enable Master
Latency Timer
PCI INTA IRQ Mapping
Description
Controls whether or not the system activates the embedded PCI
device. The default setting is Enabled.
Enables the selected device as a PCI bus master. The default setting
is Enabled.
Sets the minimum guaranteed time slice allotted for the bust master in
units of PCI bus clocks. The default setting is 0040H.
Devices can use hardware interrupts called IRQs. A PCI device
cannot use IRQs that are already in use by ISA devices. Use Auto
only if no ISA legacy cards are installed. The default setting is Auto-
select.
Description
Controls whether or not the system activates the embedded PCI
device. The default setting is Enabled.
Initializes device expansion ROM. The default setting is Enabled.
Enables the selected device as a PCI bus master. The default
setting is Enabled.
Sets the minimum guaranteed time slice allotted for the bust master
in units of PCI bus clocks. The default setting is 0040H.
Devices can use hardware interrupts called IRQs. A PCI device
cannot use IRQs that are already in use by ISA devices. Use Auto
only if no ISA legacy cards are installed. The default setting is
Auto-select.
55