Preface; About This Document; Document Conventions - Intergraph StudioZ GT RAX Setup Manual

Preface

This System Setup document describes setting up, configuring, and reinstalling system software on
your Intergraph Computer Systems rack-mount GT RAX system. This document supports the
following RAX systems:
StudioZ GT RAX for SOFTIMAGE|DS
StudioZ GT for SynaFlex
ViZRAX-GT

About This Document

This System Setup document is organized as follows:
Chapter 1, "Setting Up the Hardware," describes how to set up the system hardware.
Chapter 2, "Setting Up the Software," describes how to set up the operating system and
associated system software.
Chapter 3, "Configuring the System," describes how to configure the system for use.
Chapter 4, "Operating Notes," describes how to use essential system features and provides
other important basic information.
Chapter 5, "Configuring the BIOS," describes how to use the BIOS Setup program to
configure the system's basic input/output system (BIOS).
Chapter 6, "Troubleshooting," describes how to resolve common system problems.
Chapter 7, "Reinstalling System Software," describes how to reinstall the operating system
and associated system software, if required.

Document Conventions

Bold
Italic
Monospace
SMALL CAPS
+
CTRL D
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard (such as
directories. You can type filenames and directory names in the dialog boxes or
the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and simultaneously.
D
, , or 3) and names of files and
D ALT F
vii
CTRL