Table of Contents
Advertisement
Printing via LPR port in Windows NT 4.0
When using the printer on a TCP/IP network in Windows NT 4.0,
follow the steps below to connect the network printer to your
computer using the LPR port.
Setting up your printer
1. Make sure the printer is turned on.
2. Click Start, point to Settings, and then click Printers.
3. Double-click the Add Printers icon, and click the My
Computer radio button, then click Next.
4. Click Add Port in the Add Printer wizard dialog box.
5. Select LPR Port from the Available Printer Port list, and click
New Port.
Note:
You cannot use the Lexmark TCP/IP Network Port with this
network adapter.
6. Enter the IP address of the network adapter in the first text.
Click OK to return to the Printer Ports dialog box.
7. Follow the on-screen instructions to install the printer driver.
Note:
If the Add Printer wizard asks you to select either Keep existing
driver or Replace existing driver, be sure to click the Replace
existing driver radio button.
Settings for Windows 2000/NT
6-5
Advertisement
Table of Contents
