Replacing The Power Supply - Gateway 9315 User Manual

Replacing the power supply

Warning
To replace the power supply:
1
Follow the instructions in
sure that you turn off the server, then unplug the power cord and all other cables
connected to the server.
2
Follow the instructions in
3
If you have a hot-swap backplane installed, follow the instructions in
air baffle" on page
4
Disconnect the power signal cable, main power cable, and the CPU power cables from
the system board.
5
Disconnect the flex cable and the 2×3 power cable from the backplane.
Flex cable
2×3 cable
80
The power supply in this server contains no user-serviceable parts.
Only a qualified computer technician should service the power supply.
Your server comes with a 3-wire AC power cord fitted with the correct
plug style for your region. If this plug does not match the connector
on your surge protector, UPS, or wall outlet, do not attempt to modify
the plug in any way. Use a surge protector, UPS, or wall outlet that
is appropriate for the supplied AC power cord.
"Preventing static electricity discharge" on page
"Opening the server case" on page
42.
www.gateway.com
37. Make
38.
"Removing the