Gateway 9315 User Manual page 67

9
Press and hold the C
Important
10
Configure the RAID options, then exit the RAID BIOS console.
11
Reboot the server.
To configure the SATA RAID solution:
1
Open the BIOS Setup utility as described in the previous procedure.
2
Select
Configure
3
Press the S
indicator changes from READY to ONLINE.
4
Press
Enter
configurable arrays.
62
key, then press the E key. The RAID BIOS console will open.
TRL
When you press
the following error message: Error (0146): Insufficient Memory
to Shadow PCI ROM. This error message can be ignored.
from the
Management
to associate the selected physical drives with the current array. The
PACEBAR
when you finish creating the current array, then press F10 to select
C + E
to configure the SATA RAID, you will see
TRL
menu, then select
www.gateway.com
.
Easy Configuration