Removing And Installing Pci Expansion Cards; Removing And Installing The Pci Riser Assembly - Gateway 9315 User Manual

Removing and Installing PCI expansion
cards
Caution

Removing and installing the PCI riser assembly

To remove and install the PCI riser assembly:
1
Follow the instructions in
sure that you turn off the server, then unplug the power cord and all other cables
connected to the server.
2
Follow the instructions in
3
If necessary, disconnect any cables that are attached to installed PCI expansion cards.
4
Lift the PCI riser assembly from the system board by lifting the two, blue latches on
the assembly.
The PCI riser assembly and individual PCI expansion cards are not
hot-swappable. Before installing or removing the any part of the
assembly, make sure that power is turned off and the power cord is
unplugged.
"Preventing static electricity discharge" on page
"Opening the server case" on page
www.gateway.com
37. Make
38.
69