Gateway 9315 User Manual page 72

maintained as a spare, only 75% of the installed memory is usable. For example, if six
2 GB DIMMs are installed, only four are actively used (the other two are used as spares),
so the maximum usable memory for this configuration would be 8 GB.
A DIMM fault LED adjacent to the DIMM slot will light orange to indicate the failed
memory module.
To install or replace memory:
1
Follow the instructions in
sure that you turn off the server, then unplug the power cord and all other cables
connected to the server.
2
Follow the instructions in
3
Pull the plastic tabs away from the sides of the memory module slot. If you are
replacing a memory module, lift the old module out of the slot.
4
Align the notch on the new module with the notch in the memory module slot and
press the module firmly into the slot. The tabs on the sides of the memory slot should
secure the memory module automatically.
5
Follow the instructions in
"Preventing static electricity discharge" on page
"Opening the server case" on page
DIMM 2A
DIMM 3B
DIMM 3A
"Closing the server case" on page
www.gateway.com
37. Make
38.
DIMM 2B
DIMM 1A
DIMM 1B
39.
67