Gateway 9315 User Manual page 95

13
Reinstall the memory by following the instructions in
page 65.
14
Reinstall the processors by following the instructions in
page 76.
15
Reinstall the fan module by following the instructions in
on page 75.
16
Reattach the cables you removed in
17
Reinstall the PCI riser assembly by following the instructions in
installing the PCI riser assembly" on page
18
Follow the instructions in
19
Follow the instructions in
20
Turn on your server, then press F2 when the Gateway logo screen appears during
startup.
21
Check BIOS settings to make sure that they detect the server's new hardware, then
save your changes (if any) and close the BIOS Setup utility.
22
If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see
90
Step 7.
69.
"Installing the processor air duct" on page
"Closing the server case" on page
"Getting Help" on page
www.gateway.com
"Installing memory" on
"Installing a processor" on
"Replacing a system fan"
"Removing and
42.
39.
7.