Gateway 9315 User Manual page 75

5
If you are installing or replacing a PCI expansion card, follow the instructions in
"Removing and installing a PCI expansion card" on page
Caution
- OR -
If you are installing or replacing the PCI riser connector, follow the instructions in
"Removing and installing a PCI riser connector" on page
6
Position the PCI riser assembly over the PCI sockets on the server board, lining up
the four hooks at the back of the riser assembly with the four slots in the back of the
chassis.
7
Press the PCI riser assembly back into the server.
8
Follow the instructions in
9
See the card's documentation for software installation instructions.
70
Do not touch the contacts on the bottom part of the expansion card.
Touching the contacts can cause electrostatic damage to the card.
"Closing the server case" on page
www.gateway.com
71.
72.
Hooks
Slots
39.