Gateway 9315 User Manual page 100

To recover the old BIOS:
1
Turn on or restart the server.
2
Press and hold C
To manually recover the BIOS:
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in
Caution
3
Remove the jumper across pins 2-3 of jumper J1H3 (Rcvr Boot), then place the jumper
across pins 1-2.
4
Follow the instructions in
+H . The old BIOS is recovered.
TRL OME
"Opening the server case" on page
Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
"Closing the server case" on page
www.gateway.com
44.
39.
95