Changing The Printer Driver Settings; Print Positions Do Not Match Display Positions - Ricoh Aficio SP 3400SF User Manual

Problem
Prints do not stack properly.
The whole printout is blurred.
Printed envelopes come out
creased.

Changing the Printer Driver Settings

You may eliminate certain problems by changing the printer driver settings as
described below.
Possible Cause
Cannot print properly when us-
ing a certain application, or can-
not print image data properly.
Some characters are printed
faintly or not printed.

Print Positions Do Not Match Display Positions

If the position of items on the printed page differs from the position displayed
on the computer screen, the cause may be one of the following.
Possible Cause
Page layout settings have not
been configured.
The paper size setting does not
match the paper loaded.
The printable area has been
changed.
Solution
• Paper is damp. Use paper that has been stored properly.
See p.56 "Paper and Other Media".
• Raise the stop fence. See p.30 "Unpacking" .
• Paper is damp. Use paper that has been stored properly.
See p.56 "Paper and Other Media".
• If you enable [Toner Saver Mode] under [Machine Settings],
printing is generally less dense.
• Toner is almost depleted. If "Near End Print Cartridge"
appears on the screen, replace the print cartridge.
• Condensation may have collected. If rapid change in
temperature or humidity occurs, use this machine only
after it has acclimatized.
Check if the green levers found inside the rear cover are
properly set.
Solution
• Increase the print quality settings.
• Adjust the image density.
• Set the document to print in gray-scale.
• Increase the print quality settings.
• Set the document to print in gray-scale.
Solution
Check that the page layout settings are properly configured
in the application.
Make sure the paper size selected in the printer properties
dialog box matches the size of the paper loaded. For details,
see the printer driver Help.
Set the printable area to maximum. For details, see the print-
er driver Help.
Printer Problems
9
289