Maintenance
D
Lift the machine by using the inset grips on both sides of the machine, and
then move it horizontally to the place where you want to use it.
E
If you have removed tray 2, reinstall it.
Note
❒ Be sure to hold the machine level while carrying it. To prevent toner from
spilling, move the machine carefully.
Reference
For details about [Scanner Carriage], see p.218 "Machine Settings".
Moving over a Long Distance
If you intend to move the machine over a long distance, you must pack it well.
Empty all the paper trays, but do not remove the print cartridge. Take care not
to tip or tilt the machine during transit.
Important
❒ Do not remove the print cartridge when moving the machine.
A
Be sure to check the following points:
• The power switch is turned off.
10
• The power cord is unplugged from the wall outlet.
• All other cables are unplugged from the machine.
• All paper trays are empty.
B
If tray 2 is installed, remove it.
C
Return the scanning unit inside the machine to its original position using
[Scanner Carriage] under [Machine Settings].
Note
❒ Toner might spill inside the machine if the machine is not kept level during transit.
❒ For more information about moving the machine, contact your sales or ser-
vice representative.
Reference
For details about [Scanner Carriage], see p.218 "Machine Settings".
318
BSP025S