Chapter 4: Installing and Configuring UNIX Printing Software on a Linux System
2. Press RETURN if the default is OK. Otherwise, enter a new path.
Configuring UNIX Printing Software on a LINUX
System
This section contains instructions on how to configure UNIX Printing Software on a
Linux System.
Configuration topics include:
•
•
i
Creating a Print Queue for a LINUX (Alpha or Intel) System
To create a print queue on a LINUX (Alpha or Intel) System, you must run the
make_filter script. Instructions are as follows:
1. From the /tmp/install directory, enter the following command at the command
2. Press RETURN to accept the default directory.
4-648/25/02
Select LPSROOT [/opt/lpspr]
is an upper level directory structure under which rest of the installation
LPSROOT
code is installed.
The following message appears:
Deinstallation successful
how to create print queues.
how to add banner pages to print jobs.
You must be a Super User (Root) in order to perform any of the configuration
tasks described in this chapter. Refer to the section,
page 4-60
for instructions on how to accomplish this task.
line:
# ./make_filter
The following prompt appears
# Enter filter directory: (/etc/lp/filter)
The following prompt appears:
Enter the filter name:
UNIX Printing Software Administration and Installation Guide
"Super User Privileges" on