What You Need To Know; How To Use This Guide - Oki B6100n Administration Manual

Guide: administration and installation, b6100 unix printing software

Hide thumbs Also See for B6100n:

Table of Contents

Preface: About this Guide

What You Need to Know

A working knowledge of the UNIX platform(s) on which you will be installing,

configuring, and using UNIX Printing Software is necessary for executing commands

on the command line interface or for setting up printer information on the graphical

user interface for UNIX Printing Software.

There are seven chapters in the UNIX Printing Solution Installation and Configuration

Guide: a Preface chapter, and six other chapters, respectively numbered 1 through 6.

Chapters 1 through 5 provide individual instructions on how to install and configure

UNIX Printing Software for each separate UNIX system. Chapter 6 is an overall

description on how to run UNIX Printing Software.

Once you complete reading the Preface, go to the chapter in this guide that describes

the operating system on which you will be installing and running the software. Once

you complete the installation and configuration phase, refer to the final chapter in this

guide for instructions on how to use the software.

A description of each chapter found in this guide is as follows:

P-28/25/02

Table P-1. How to Use this Guide

Read

Preface

The general requirements necessary for operating UNIX

Printing Software. In addition, this chapter provides a

description of the chapter contents and style conventions found

in the UNIX Printing Software Guide.

Chapter 1