Create A Temporary Directory; Mount The Cd-Rom On An Hp/Ux System - Oki B6100n Administration Manual

Chapter 2: Installing and Configuring UNIX Printing Software on a HP/UX System
2. Enter the super user password. Press RETURN.

Create a Temporary Directory

You must make a temporary directory for the UNIX Printing Software kit. Instructions
are as follows:
i
1. Enter the following command at the command line. Press RETURN.
2. Enter the following command at the command line. Press RETURN.
3. Your next step is to mount the CD-ROM. Refer to the next section, Mount the

Mount the CD-ROM on an HP/UX System

Instructions on how to mount the CD-ROM on an HP/UX System are as follows:
i
1. Create a directory to serve as the mounting point for the CD-ROM.
2. Enter the following command at the command line:
2-268/25/02
You must have super user privileges to complete this task. Refer to the section,
"Super User Privileges" on page 2-25
user.
# mkdir /tmp/install
# cd /tmp/install
CD-ROM for instructions on how to accomplish this task.
You must have super user privileges to complete this task. Refer to the section,
"Super User Privileges" on page 2-25
user.
Refer to the section Creating a Temporary Directory for instructions on how to
complete this task.
# mount -F cdfs -r /dev/dsk/c1t7do /mycdrom
where identifies the file system type
-F
where identifies the CD-ROM file system type
edfs
where is read only
-r
where
/dev/dsk/c1t7do
for instructions on how to become a super
for instructions on how to become a super
is the CD-ROM device file.
UNIX Printing Software Administration and Installation Guide