Oki B6100n Administration Manual page 105

Sdriver Command Options
The following is a list of command options that you can use to configure sdriver.
Table 6-2. sdriver Command Option Flags
UNIX Printing Software Administration and Installation Guide
Flag Parameter
-d
-L
-p Port #
-I netaddr
-P queue
-F
Definition
Activates the sdriver debug mode.
Activates the logging feature.
Identifies the port number on which the printer or print
server is listening. The default port for the sdriver is 35.
Identifies the Internet Address of the Printer or Print
Server.
Note:
The -I option is mutually exclusive with the
-P flag.
Identifies the name of the print queue as defined in
/etc/hosts/ or distributed hosts file (yp).
Note:
The -P option is mutually exclusive with the
-I flag.
Must be added as the first argument when run as a
backend filter to lpsched, lpd, or other spoolers.
sdriver General Information
8/25/026-99