Mount The Cd-Rom On An Ibm/Aix System Using Smit - Oki B6100n Administration Manual

Chapter 3: Installing and Configuring UNIX Printing Software on an IBM/AIX System

Mount the CD-ROM on an IBM/AIX System Using SMIT

To mount a CD-ROM on an IBM/AIX system using SMIT, follow the instructions
below:
1. Enter the following command at the command line:
2. Click the Devices button.
3. Click the CD-ROM select button.
4. Click Done.
5. Click the System Management button.
6. Click the System Storage Management button.
7. Click the File Systems button.
8. Click the Mount a File System button.
9. From the File System Name field, click the List Button.
10. Select the device file name.
11. From the Directory Over Which to Mount field, click the List Button.
12. Select the directory that was created for the mount point.
13. From the Type of File System field, click the List Button.
14. Select
15. Select
3-468/25/02
#
SMIT
The System Management Window appears
The CD-ROM Select Popup appears , displaying a top and lower box. The lower
box contains the same output as that generated by the CLI version of
A window appears.
A window appears.
Typically, the CD-ROM device file name is the same as the first three
Note:
characters included at the beginning of Step 3 (i.e., cdo). If so, the device
file is
/dev/cdo
A window appears.
from the list.
cdrfs
to force the mount.
n
The default values for the remaining fields are valid entries, and do not need to be
updated, unless specifically required by your system.
.
UNIX Printing Software Administration and Installation Guide
.
lsdev