Unarchiving .Tar Files - Oki B6100n Administration Manual

i
Determining an HP/UX Device File Type
If you do not know the device file type of your HP/UX system's CD-ROM, enter the
following command at the command line:
A list of available devices for your system will appear. One of the devices should be
your CD-ROM.
Determining the File System Type of the CD-ROM
To identify the file system type of your CD-ROM, enter the following command at the
command line:
where

Unarchiving .tar Files

There is a master .tar file (i.e.,
unarchived. Inside the master .tar file is a set of individual .tar files that must also be
unarchived, as necessary, for each of the UNIX operating systems.
The .tar files maintained by
where xx is the version of the software kit.
•
•
•
•
•
•
UNIX Printing Software Administration and Installation Guide
where is the mount point.
/mycdrom
Once the software kit is in its temporary directory, you will need to untar the tar
File. Refer to the section,
# /usr/sbin/ioscan -Fn -C disk
#
fstyp dev_file
is the device file identified by the
dev_file
a dunix.tar for use with Compaq Tru64 UNIX systems.
an hp9000_778.tar for use with HP/UX systems.
linuxa.tar for use on a Alpha-based Linux system
linuxi.tar for use on an Intel-based Linux system.
an rs6000.tar for use with IBM/AIX systems.
a sun4u.tar for use on SUN Solaris systems
"Unarchiving .tar Files" on page 2-27
) within your software kit that must be
unprswxx.tar
include:
unprswxx.tar
Installation Prerequisites
of this guide.
command.
ioscan
8/25/022-27