Oki B6100n Administration Manual page 22

Chapter 1: Installing and Configuring UNIX Printing Software on a Compaq Tru64 UNIX System
7. Enter the following pathname:
8. Enter
9. Enter a path for the log file, or accept the default. Press RETURN.
10. Press RETURN to accept the default directory. (Recommended choice).
11. Press RETURN to accept the default directory. (Recommended choice).
1-168/25/02
Set device pathname:
/dev/null
The following prompt appears:
Do you want to capture print job accounting data
([y][n]):
To capture logging, you must use the
Note:
within
/etc/printcap
you specify.
to capture print event information, or
y
Press RETURN.
If you answered to capture print event information, the following prompt
y
appears:
Set accounting file 'af' [
The following prompt appears:
Set spooler directory 'sd' [/usr/spool/lp20]
The following prompt appears:
Set printer error log file 'lf' [/usr/admin/lp20err]:
An entry is either an error or event written out by lpd (spooler).
Note:
'lf'
The following printcap information appears:
Enter the name of the printcap symbol you wish to
modify. Other valid entries are:
'q' to quit (no more changes)
'p' to print symbols you have specified so far
'l' to list all of the possible symbols and defaults
The name of the printcap symbols are:
af br cf ct df dn du fc ff fo fs gf ic if lf lo
lp mc mx nc nf of op os pl pp ps pw px py rf rm
rp rs rw sb sc sd s sh st tf tr ts uv vr xc xf
-L
. sdriver will write events to the AF entry that
n
/usr/admin/lp20acct]
UNIX Printing Software Administration and Installation Guide
flag on the sdriver command line
to continue creating a print queue.