Oki B6100n Administration Manual page 39

2. Enter a name for the printer model. Press RETURN.
3. Enter a name for the printer. Press RETURN.
4. Enter a port number for the printer. Press RETURN.
5. Enter
6. Enter
7. Enter a pathname for the log file:
UNIX Printing Software Administration and Installation Guide
Example:
printer2
The following prompt appears:
Enter the name of the printer:
Printer is the name of the printer as it exists in /etc/hosts or YP/DNS.
Note:
Example:
hallway_40
The following prompt appears:
Enter the port of the printer:
This is the socket # that sdriver will use for connecting to the printer.
Note:
Example:
6869
The following prompt appears:
Debug Mode [no, n, yes, y]:
to activate the Debug Mode for the socket driver. Press RETURN.
y
The following prompt appears:
Log Mode [no, n, yes, y]:
to activate the log mode. Press RETURN.
y
The following prompt appears:
Enter the pathname of the log file:
Example:
# /home/adv/40test
The following prompt appears:
Model printer2 has been created in /usr/lib/lp/model.
Configuring UNIX Printing Software on a HP/UX System
8/25/022-33