Oki B6100n Administration Manual page 23

12. Enter the symbol:
13. Enter the following command. Press RETURN.
14. Enter
15. Enter y if the new information is correct.
16. The following prompt appears:
17. Press q to quit
18. Enter
19. Press
UNIX Printing Software Administration and Installation Guide
Configuring Unix Printing Software on a Compaq Tru64 UNIX System
xs ya yd yj yp ys yt Da Dl It Lf Lu MI Nu Or Ot
Ps Sd Si Ss Ul Xf
. Press RETURN.
if
# /usr/sbin/sdriver -F [-Ixxx.xxx.xxx.xxx | -Pqueue] -pyyyy
[-L -d]
• where
xxx.xxx.xxx.xxx
will send jobs.
• Printer name is the name of the printer as defined in
.
DNS
Example:
/usr/sbin/sdriver -F -I10.10.114.40 -p6869 -L -d
The socket number used will vary from printer to printer. The release
Note:
notes for this product contains a list of socket numbers for supported
printers.
The following prompt appears:
Enter symbol name: mx
MX identifies the maximum number of bytes allowed to the spooler and
Note:
to the printer.
to allow unlimited bytes. Press RETURN.
0
The following prompt appears:
Is this correct [y]:
Enter symbol name:
lprsetup
The following prompt appears:
Are these the final values for printer 20? [y]
if the values for printer 20 are final.
y
The following prompt appears:
Do you want to add comments to the printcap file [n]:
followed by the RETURN key.
n
is the IP address of the printer to which this queue
.
or or
/etc/hosts yp
8/25/021-17