Oki B6100n Administration Manual page 71

3. Enter a name for the filter. Press RETURN.
4. Enter the name of the printer. Press RETURN.
5. Enter a port number for the print server. Press RETURN.
6. Enter
7. Enter
8. Enter a pathname for the log file:
UNIX Printing Software Administration and Installation Guide
If the filter name already exists, you will be prompted to overwrite it. If the filter
name does not already exist, the following prompt appears:
Enter the name of the printer:
The following prompt appears:
Enter the port of the print server.
Example:
6869
This is the socket number that sdriver will use for connecting to the
Note:
printer.
The following prompt appears:
Debug Mode [no, n, yes, y]:
to activate the debug mode for the socket driver. Press RETURN.
y
The following prompt appears:
Log Mode [no, n, yes, y]:
to activate the log mode. Press RETURN.
y
The following prompt appears:
Enter the pathname of the log file:
Example:
# /home/adv/40test
The following prompt appears:
Filter Filter_Name has been created.
Configuring UNIX Printing Software on a LINUX System
8/25/024-65