Installing Unix Printing Software On A Linux (Alpha Or Intel) System; Deinstalling Unix Printing Software - Oki B6100n Administration Manual

Installing UNIX Printing Software on a Linux (Alpha or
Intel) System
Instructions for installing UNIX Printing Software on a Linux (Alpha or Intel) System
are as follows:
1. Enter the following command at the command line. Press
2. Press
3. Press
4. Press
i

Deinstalling UNIX Printing Software

If lpspr_install does not successfully copy all of the files within the kit, you must
delete the existing files from the system before reinstalling the software. The
lpspr_deinstall command will remove the directory structure for all existing files for
lpspr, xlpsprint and sdriver.
You can use this deinstall command on any of the UNIX systems.
1. From the command line, enter the following command:
UNIX Printing Software Administration and Installation Guide

Installing UNIX Printing Software on a Linux (Alpha or Intel) System

./lpspr_install
#
The following prompt appears:
Select LPSROOT [/opt/lpspr]:
is an upper level directory structure under which the rest of the code
LPSROOT
will be installed.
to accept the default, or enter another pathname to be used by
RETURN
LPSROOT.
Another prompt appears:
Select LPRCOM [/usr/bin/lpr]:
to accept the default. Another prompt appears:
RETURN
Select LPRFLAG [-P]
to accept the default. The following message appears:
RETURN
Installation Successful
If the installation is unsuccessful, you must deinstall the existing software,
before you can reinstall it. Refer to the next section,
Printing Software" on page 4-63
#
./lpspr_deinstall
The following prompt appears:
"Deinstalling UNIX
for instructions on how to accomplish this task.
.
RETURN
8/25/024-63