Creating Print Queues For A Compaq Tru64 Unix System - Oki B6100n Administration Manual

Creating Print Queues for a Compaq Tru64 UNIX System

Each print queue within a UNIX system corresponds to an internet address of a
particular printer. You establish this association during the creation of the print queue.
When configuring and/or running sdriver, the printer's IP address is included after the
-I switch. Alternatively, the print queue name is included after the -P switch when
using sdriver. In addition, the print queue is also the first item to appear on each line of
the printer-to-model file (printer2mdl).
To create a print queue for a Compaq Tru64 UNIX System, follow the instructions
below:
1. Enter the following command at the command line:
2. Type
3. Enter the type of print queue that you are creating. For example, LP20. Press
4. Press RETURN for 'unknown'.
5. Press
6. Enter a printer synonym, or skip to the next step. Press RETURN.
UNIX Printing Software Administration and Installation Guide
Configuring Unix Printing Software on a Compaq Tru64 UNIX System
# /usr/sbin lprsetup
The following prompt appears:
<add modify delete exit view quit help>:
. Press RETURN.
add
The following prompt appears:
Enter printer name to add [20]:
LPRsetup automatically assigns a sequential name to the printer.
Note:
RETURN.
A listing of queue types, along with the following prompt appears:
Enter the FULL name of one of the following printer
types, or press RETURN for [unknown]:
The following prompt appears:
Using 'unknown' for printer type, OK? [n]:
followed by the RETURN key.
Y
The following prompt appears:
Enter printer synonym:
The printer synonym is an optional, additional name that can help you to
Note:
identify the printer.
The following prompt appears:
8/25/021-15