Deinstalling Unix Printing Software; Configuring Unix Printing Software On A Sun Solaris System - Oki B6100n Administration Manual

Chapter 5: Installing and Configuring UNIX Printing Software on a Sun Solaris System

Deinstalling UNIX Printing Software

If lpspr_install does not successfully copy all of the files within the kit, you must
delete the existing files from the system before reinstalling the software. The
lpspr_deinstall command will remove the directory structure for all existing files for
lpspr, xlpsprint and sdriver.
You can use this deinstall command on any of the UNIX systems.
1. From the command line, enter the following command:
2. Press RETURN if the default is OK. Otherwise, enter a new path.
Configuring UNIX Printing Software on a SUN Solaris
System
This section contains instructions on how to configure UNIX Printing Software on a
Sun System.
Configuration topics include:
•
•
i
5-788/25/02
#
./lpspr_deinstall
The following prompt appears:
Select LPSROOT [/opt/lpspr]
is an upper level directory structure under which rest of the installation
LPSROOT
code is installed.
The following message appears:
Deinstallation successful
how to create print queues.
how to add banner pages to print jobs.
You must be a Super User (Root) in order to perform any of the configuration
tasks described in this chapter. Refer to the section,
page 5-74 for instructions on how to accomplish this task.
UNIX Printing Software Administration and Installation Guide
"Super User Privileges" on