Installing Unix Printing Software On An Ibm/Aix System - Oki B6100n Administration Manual

Installing UNIX Printing Software on an IBM/AIX
System
Instructions for installing UNIX Printing Software on an IBM/AIX System are as
follows:
1. Enter the following command at the command line. Press
2. Press
3. Press
4. Press
i
UNIX Printing Software Administration and Installation Guide
./lpspr_install
#
The following prompt appears:
Select LPSROOT [/opt/lpspr]:
is an upper level directory structure under which the rest of the code
LPSROOT
will be installed.
to accept the default, or enter another pathname to be used by
RETURN
LPSROOT.
Another prompt appears:
Select LPRCOM [/usr/bin/lpr]:
to accept the default. Another prompt appears:
RETURN
Select LPRFLAG [-P]
to accept the default. The following message appears:
RETURN
Installation Successful
If the installation is unsuccessful, you must deinstall the existing software,
before you can reinstall it. Refer to the section,
Software" on page 3-50

Installing UNIX Printing Software on an IBM/AIX System

for instructions on how to accomplish this task.
.
RETURN
"Deinstalling UNIX Printing
8/25/023-49