Create A Temporary Directory; Mount The Cd-Rom On An Ibm/Aix System - Oki B6100n Administration Manual

Chapter 3: Installing and Configuring UNIX Printing Software on an IBM/AIX System
2. Enter the super user password. Press RETURN.

Create a Temporary Directory

You must make a temporary directory for the UNIX Printing Software kit. Instructions
are as follows:
i
1. Enter the following command at the command line. Press RETURN.
2. Enter the following command at the command line. Press RETURN.
3. Your next step is to mount the CD-ROM. Refer to the next section, Mount the

Mount the CD-ROM on an IBM/AIX System

Instructions on how to mount the CD-ROM on an IBM/AIX System are as follows
i
Instructions are as follows:
1. Create a directory to serve as the mounting point for the CD-ROM.
2. Mount the device on the mount point by entering the following command:
3-448/25/02
You must have super user privileges to complete this task. Refer to the section,
"Super User Privileges" on page 3-43
user.
# mkdir /tmp/install
# cd /tmp/install
CD-ROM for instructions on how to accomplish this task.
You must have super user privileges to complete this task. Refer to the section,
"Super User Privileges" on page 3-43
user.
Refer to the section "Create a Temporary Directory" on page 3-44
on how to complete this task.
Your CD device file will most likely be
Note:
# /usr/sbin/mount -v cdrfs -r /dev/cdo /mycdrom
where is read only.
-r
where - is the cd file system type.
v cdrfr
where is the CD-ROM device file
/dev/cdo
for instructions on how to become a super
for instructions on how to become a super
UNIX Printing Software Administration and Installation Guide
for instructions
.
/dev/cdo