Deinstalling UNIX Printing Software
If lpspr_install does not successfully copy all of the files within the kit, you must
delete the existing files from the system before reinstalling the software. The
lpspr_deinstall command will remove the directory structure for all existing files for
lpspr, xlpsprint and sdriver.
You can use this deinstall command on any of the UNIX systems.
1. From the command line, enter the following command:
2. Press RETURN if the default is OK. Otherwise, enter a new path.
Configuring UNIX Printing Software on a HP/UX
System
This section contains instructions on how to configure UNIX Printing Software on a
HP/UX System.
Configuration topics include:
•
•
•
•
•
UNIX Printing Software Administration and Installation Guide
#
./lpspr_deinstall
The following prompt appears:
Select LPSROOT [/opt/lpspr]
is an upper level directory structure under which rest of the installation
LPSROOT
code is installed.
The following message appears:
Deinstallation successful
how to create print queues.
how to configure xlpsprint.
how to configure lpspr.
how to add new printer models to your system
how to add banner pages to a print job.
Deinstalling UNIX Printing Software
8/25/022-31