Oki B6100n Administration Manual page 87

Creating a Print Queue Using the lpadmin Command
Now that
Instructions on how to create a print queue are as follows:
1. Enter the following two
2. Enter the following command to reinstate lpsched.
3. Enter the
4. Enter the following command at the command line. Press RETURN.
5. Enter the
UNIX Printing Software Administration and Installation Guide
Configuring UNIX Printing Software on a SUN Solaris System
has been stopped, the
lpsched
RETURN after each command entry.
# lpadmin -p40_Test -m(model name) -v /dev/null
where 40_Test is the queue name and
make_model.
# lpadmin -p40_Test -Iany
where is the queue name and
40_Test
all text, Postscript and PCI files.
#
/usr/lib/lpsched
The following prompt appears:
Print Services Started
command at the command line: Press RETURN.
lpstat
Example:
#
lpstat -p40_test
The following message appears:
40_test disabled
#
enable printer_name
Example:
#
enable 40_test
The following message appears:
printer "40_test" now enabled.
command at the command line to prepare the print queue to
accept
accept requests:
Example:
# /usr/sbin/accept 40_test
The following message appears:
destination "40_test" now accepting requests.
lpadmin
commands at the command line. Press
lpadmin
is the name of the script created by
-M
is the flag that allows you to include
-I
command will work.
8/25/025-81