Oki B6100n Administration Manual page 79

•
i
UNIX Printing Software Administration and Installation Guide
System V-based Printing
Users Using UNIX systems that are based on the SYSTEM V derivative must
enter the lp command at the command line to send files to the spooler daemon for
printing.
# lp -dprinter filename
where is the name of the print queue created by the system
printer
administrator using
lpadmin
where is the name of a file that you would like to print using the
filename
queued printer.
Example:
lp -dCopyroom_40 Test2.txt
#
The flag indicates the print queue name for the print job.
-d
The installation script lpspr_install prompts you to select a path for
a flag for .
LPRFLAG
is a program file that sends flags to the spooler daemon for printing. It
LPRCOM
has a default path of /usr/bin/lpr. You can accept the default path by pressing
, or you can provide a new one at the command line.
RETURN
is an
LPRFLAG LPRCOM
The flag that you select for
subsystem. If it is a BSD-derivative, press
However, if the subsystem is a SYSTEM V derivative, you must change the
default flag to .
-d
, or another System V related utility.
SMIT
flag that is usually followed by the print queue name.
will depend upon your UNIX printing
LPRFLAG
RETURN
lpr and lp
LPRCOM
to select the default flag
8/25/025-73
and
.
-P