Oki B6100n Administration Manual page 51

3. Once the command successfully executes, you can refer to the device by the
i
Dismount the CD-ROM on an IBM/AIX System
To dismount the CD-ROM from an IBM/AIX System, enter the following command
at the command line:
# /usr/sbin/umount /mycdrom
Identifying the CD-ROM Device File
To identify the CD-ROM Device File, enter the following command at the command
line:
Typically, the first three characters in the reply will identify the CD-ROM Device File
name.
Example:
If you got the following reply:
the CD-ROM Device File would be
UNIX Printing Software Administration and Installation Guide
where identifies the mount point for the CD-ROM.
/mycdrom
mount point, e.g.,
/mycdrom
Once the software kit is in its temporary directory, you will need to untar the tar
File. Refer to the section,
# lsdev -C -c cdrom
cdo available 04-80-60-3, 0 SCSI Multimedia, CD-ROM Drive
.
"Unarchiving .tar Files" on page 3-47
/dev/cdo/
Installation Prerequisites
of this guide.
8/25/023-45