Unarchiving .Tar Files - Oki B6100n Administration Manual

3. Once the command successfully executes, you can refer to the device by the
i

Unarchiving .tar Files

There is a master .tar file (i.e.,
unarchived. Inside the master .tar file is a set of individual .tar files that must also be
unarchived, as necessary, for each of the UNIX operating systems.
The .tar files maintained by
•
•
•
•
•
•
i
UNIX Printing Software Administration and Installation Guide
# mount -r -t cdfs -o noversion -v /dev/rz4c /mycdrom
where is read only.
-r
where is the file type
-t
where is the CD-ROM file system.
cdfs
where noversion invokes the skip version process.
-o
where selects the device drive.
-v
where is the CD-ROM device file.
/dev/rz4c
where / identifies the mounting point for the CD-ROM.
mycdrom
mount point, e.g., mycdrom.
Once the software kit is in its temporary directory, you will need to untar the tar
File. Refer to the section,
where xx is the version of the software kit.
a dunix.tar for use with Compaq Tru64 UNIX systems.
an hp9000_778.tar for use with HP/UX systems.
linuxa.tar for use on a Alpha-based Linux system
linuxi.tar for use on an Intel-based Linux system.
an rs6000.tar for use with IBM/AIX systems.
a sun4u.tar for use on SUN Solaris systems.
Before unarchiving a .tar file, make sure that you are located in the temporary
directory into which you want to install the kit.
"Unarchiving .tar Files" on page 1-11
) within your software kit that must be
unprswxx.tar
include:
unprswxx.tar
Installation Prerequisites
of this guide.
8/25/021-11