Installation Prerequisites - Oki B6100n Administration Manual

i

Installation Prerequisites

There are several prerequisite tasks that you must complete before you can install the
software. A description of each one is as follows:
1. You must be a Super User (Root) in order to install UNIX Printing Software.
2. You must make a temporary directory for the software kit. Refer to the section,
3. You are going to need to untar the Tar file once the software kit is in its temporary
4. With the Tar File unarchived, you can run the lpspr_install command. Refer to the
5. You should have a basic understanding about UNIX printing subsystems and the
UNIX Printing Software Administration and Installation Guide
lp -dCopyroom_40 Test2.txt
#
The flag indicates the print queue name for the print job.
-d
The installation script lpspr_install prompts you to select a path for
a flag for .
LPRFLAG
is a program file that sends flags to the spooler daemon for printing. It
LPRCOM
has a default path of /usr/bin/lpr. You can accept the default path by pressing
, or you can provide a new one at the command line.
RETURN
is an
LPRFLAG LPRCOM
The flag that you select for
subsystem. If it is a BSD-derivative, press
However, if the subsystem is a SYSTEM V derivative, you must change the
default flag to .
-d
Refer to the section, "Super User Privileges" on page 1-10
this topic.
"Create a Temporary Directory" on page 1-10
directory. Refer to the section,
about this topic.
section within this chapter that is specific to your UNIX system.
types of commands that they require.
flag that is usually followed by the print queue name.
will depend upon your UNIX printing
LPRFLAG
RETURN
"Unarchiving .tar Files" on page 1-11
Installation Prerequisites
LPRCOM
to select the default flag
to learn more about
to learn more about this topic.
to learn more
and
.
-P
8/25/021-9