Turning Password Check Communication On/Off - Kyocera KM-C2630D Operation Manual

Turning Password Check
Communication ON/OFF
Turn Password Check Communication ON when you want to limit
to and from whom fax communication can be accomplished. There
are separate settings for controlling transmissions and receptions.
* If there are no Permit Telephone Numbers or Permit IDs
registered in this fax, Password Check Communication will not
be possible even if it is turned ON here.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
Press the Default key. The Default Setting screen will
appear.
2
Press the "Fax default" key.
(inch)
(metric)
3
Press the " " cursor key until "Password Check Comm."
is highlighted.
4
Press the "Change #" key.
Section 5 Other Features of this Fax
5
To turn Password Check ON for transmissions, press the
"ON" key under "Send".
(inch)
(metric)
6
To turn Password Check ON for receptions, press the
"ON" key under "Receive".
7
Press the "Close" key.
The message display will return to the same screen as
was displayed in step 3. If you are finished making
settings, press the Reset key.
5-47