Kyocera KM-C2630D Operation Manual page 71

3
Use the " " and/or " " cursor keys to switch to the
communication that you want.
(inch)
(metric)
4
Press the "Program/Change" key.
(inch)
(metric)
5
If you want to change the scheduled start time, press the
"Delayed TX" key and then go to the next step.
If you want to modify the destination information, press
the " " key and then go directly to step 8.
(inch)
(metric)
Section 3 Fax Operation (Various Functions)
> Changing the scheduled start time
6
Use the keypad to enter the desired time for the
communication to begin.
* If you want to change the entered time, use the " "
and/or " " keys to move the cursor to the desired
location.
7
Press the "Close" key.
The message display will return to the same screen as
was displayed in step 5.
If you also want to modify the destination information,
press the " " key. If you do NOT want to modify the
information, go directly to step 16.
> Modifying destination information
8
The currently registered information will be displayed.
• If you want to delete a fax number(s), press the
corresponding speed-dial key (or keys) and then go to
the next step.
• If you want to add a fax number(s), press the "Add" key
and then go directly to step 11.
• If you want to change a fax number(s), press the
corresponding speed-dial key and then proceed directly
to step 13.
Deleting fax numbers
9
Press the "Delete" key.
10
Press the "Yes" key.
The message display will return to the same screen as
was displayed in step 8 and you can continue to delete,
add or change other fax numbers. To do so, repeat steps 8
through 15.
If you are finished with this procedure, press the "Close"
key and go to step 16.
(inch)
(metric)
3-17