Using Different Fax And Telephone Numbers (D.r.d. Reception) [Available In Inch Versions Only] - Kyocera KM-C2630D Operation Manual

Fax system (g); fax system (h)
Hide thumbs Also See for KM-C2630D:
Table of Contents

Advertisement

Using Different Fax and Telephone Numbers (D.R.D. Reception)
[Available in inch versions only]
This reception mode utilizes the Distinctive Ring Pattern service available from some telephone companies. With this service, you can use two
or more telephone numbers on a single telephone line. Thus, you can use this fax and a telephone on the same line, but you can still designate
a different telephone number for each of them. As each number is given a different ring pattern, the fax machine is able to differentiate
between incoming calls. If one of these numbers is designated for this fax machine, and the desired ring pattern is designated for that number
in advance, fax reception will be initiated automatically whenever the machine detects the ring pattern distinctive to the fax.
* Using D.R.D. Reception to receive a telephone call is only possible if a separately purchased telephone is connected to this fax machine.
* D.R.D. reception is only possible if you subscribe to the Distinctive Ring Pattern service provided by your telephone company. Contact your
telephone company for further information on the Distinctive Ring Pattern service available.
[Reception flow]
Fax
If the other party has dialed your fax
number...
Telephone
If the other party has dialed your
telephone number...
Preparation
* Refer to "Selecting the Automatic Reception Mode (Receive Mode
setting)" on page 7-8, and select "D.R.D.".
* Make sure that "Auto RX" is displayed on the basic fax screen. If
it is not, press the reception mode select key and then press the
"Auto RX" key.
1
When a call comes in, the telephone will ring.
* If the telephone receiver is picked up while the
telephone is still ringing, the fax will deal with the call
in the same manner as a standard Manual Fax
Reception. (Refer to "Initiating the Fax Connection
Manually (Manual Fax Reception)" on page 3-20.)
The fax machine will ring using the predetermined ring pattern
for a fax and fax reception will start automatically. (The fax will
handle the call using the Automatic Fax Reception mode.)
Telephone
company
The fax machine will ring using the predetermined ring pattern
for a telephone call. Conversation is possible with the other
party if you answer the telephone that is connected to this fax
machine.
2
Section 5 Other Features of this Fax
The fax machine will then ring using the predetermined
ring pattern.
> If the call is from a telephone...
Pick up the telephone receiver and speak with the other
party.
At the end of the conversation, fax reception can be
initiated manually.
> If the call is from a fax...
Once the bell stops ringing, fax reception will start
automatically.
5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-c850dDcc 2526Dcc 2526dKm-c850Km-2630

Table of Contents