Connecting To Wireless Using Web Server; Printing A Menu Settings And Network Setup Page - Lexmark MS310 User Manual

Additional printer setup
•
Make sure a wireless network adapter installed in your printer is attached and working properly.
1
From the Finder, navigate to:
Applications > select your printer folder
2
Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen.
Note: If you encounter problems while running the application, then click
Connecting the printer to a wireless network using the Embedded Web Server
Notes:
• Make sure your printer is connected temporarily to an Ethernet network.
•
Make sure a wireless network adapter is installed in the printer and is working properly. For more information,
see the instruction sheet that came with your wireless network adapter.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The
IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Network/Ports > Wireless.
3
Modify the settings to match the settings of your access point (wireless router).
Note: Make sure to enter the correct SSID.
4
Click Submit.
5
Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the
printer back on.
6
To verify if your printer is connected to the network, print a network setup page again. Then in the Network Card
[x] section, see if the status is "Connected".

Printing a menu settings and network setup page

Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.
The network setup page prints at the same time, containing the current network settings of the printer and levels of
supplies.
From the printer control panel, press
Notes:
•
If you have not changed any menu settings, then the menu settings page lists all the factory default settings.
When you select and save other settings from the menus, they replace the factory default settings as user
default settings.
for at least four seconds.
?
.
26