Paper And Specialty Media Guide; Paper Guidelines - Lexmark MS310 User Manual

Ms310 series
Hide thumbs Also See for MS310:
Table of Contents

Advertisement

Paper and specialty media guide

40
Paper and specialty media guide
Additional information for printing on specialty media may be found in the Cardstock and Label Guide available at
http://support.lexmark.com.

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the
paper or specialty media before buying large quantities.
Paper characteristics
The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating
new paper stock.
Weight
2
The standard printer trays can automatically feed paper weights up to 90‑g/m
(24‑lb) bond grain long paper. The
2
optional trays can automatically feed paper weights up to 120‑g/m
(32‑lb) bond grain long paper. The multipurpose
2
feeder can automatically feed paper weights up to 163‑g/m
(43‑lb) bond grain long paper. Paper lighter than
2
2
60 g/m
(16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75‑g/m
(20‑lb)
2
bond grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 inches), it is recommended to use 90 g/m
(24 lb) or heavier paper.
2
Note: Two‑sided printing is supported only for 60–90‑g/m
(16–24‑lb) bond paper.
Curl
Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after
the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid,
cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding
problems.
Smoothness
Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too
smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points;
smoothness between 150–250 Sheffield points produces the best print quality.
Moisture content
The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly.
Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that
can degrade its performance.
Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24–48
hours before printing. Extend the time to several days if the storage or transportation environment is very different
from the printer environment. Thick paper may also require a longer conditioning period.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms310dMs310dn

Table of Contents