Print Is Too Light - Lexmark MS310 User Manual

Troubleshooting

Print is too light

ABC
DEF
Action
Step 1
a
From the Quality menu, increase the toner darkness. To access the
Quality menu, do either of the following:
• If the printer is on a network, then open a Web browser and type
the printer IP address in the address field. Then navigate to
Settings > Printer Settings > Quality Menu.
Note: If you do not know the IP address of the printer, then print
a network setup page and locate the IP address in the TCP/IP
section.
•
If the printer is connected to a computer by a USB or parallel cable,
then open the Local Printer Settings Utility for Windows or Printer
Settings for Macintosh.
Note: 8 is the factory default setting.
b
Resend the print job.
Is the print still too light?
Step 2
a
From the Paper Menu, check if the paper type, texture, and weight
match the paper loaded in the tray. To access the Paper Menu, do
either of the following:
• If the printer is on a network, then open a Web browser and type
the printer IP address in the address field. Then navigate to
Settings > Paper Menu.
Note: If you do not know the IP address of the printer, then print
a network setup page and locate the IP address in the TCP/IP
section.
•
If the printer is connected to a computer by a USB or parallel cable,
then open the Local Printer Settings Utility for Windows or Printer
Settings for Macintosh.
b
Resend the print job.
Is the tray set to the type and weight of the paper loaded?
Yes No
Go to step 2. The problem is solved.
Go to step 3. Change the paper type,
texture, and weight to
match the paper
loaded in the tray.
176