Etsysvpnikeproposal Table; Etsysvpnipsecpolicy Table; Etsysvpnintfpolicy Table - Enterasys Security Router X-PeditionTM User Manual

VPN MIB Tables
Table B-31 etsysVpnIkePeerProposalsTable (continued)
Field
etsysVpnIkePeerPropName
etsysVpnIkePeerPropRowStatus

etsysVpnIkeProposal Table

This table contains the IKE proposals used during IKE negotiation. The named row is equivalent
to the
is the name referenced in the etsysVpnIkePeerProposalsTable.
Table B-32 etsysVpnIkeProposalTable
Field
etsysVpnIkePropName
etsysVpnIkePropEncryptAlgorithm
etsysVpnIkePropHashAlgorithm
etsysVpnIkePropDhGroup
etsysVpnIkePropAuthMethod
etsysVpnIkePropMaxLifetimeSecs
etsysVpnIkePropMaxLifetimeKB
etsysVpnIkePropRowStatus

etsysVpnIpsecPolicy Table

This read-only table lists the IPSec policy names on the XSR. This table includes those policies
configured by means other than this MIB or CLI (that is, EZ-IPSec). The table index is
{etsysVpnIpsecPolicyName}. These policy names are used as values for etsysVpnIntfPolicyName
when applying policy to an interface.
Table B-33 etsysVpnIpsecPolicyTable
Field
etsysVpnIpsecPolicyName

etsysVpnIntfPolicy Table

This table applies IPSec policy to an interface. The table index is {ifIndex} from the mib-2 ifTable.
B-14 XSR SNMP Proprietary and Associated Standard MIBs
crypto isakmp proposal
Description
A proposal name from the etsysVpnIkeProposalTable. This object must
be used to create the row.
Acceptable values: active(1) and destroy(6). You cannot use this object
to create a row since the proposal name is needed first.
CLI command. The table index is {etsysVpnIkePropName}, which
Description
The index of the table.
Acceptable values are desCbc(1), tripleDesCbc(5), and aesCbc(7).
When used to create a row, all other values are defaulted.
Acceptable values are md5(1) and sha(2). When used to create a
row, all other values are defaulted.
Acceptable values: modp768(1), modp1024(2) and modp1536(5).
When used to create a row, all other values are defaulted.
Acceptable values are preSharedKey(1) and rsaSignatures(3).
When used to create a row, all other values are defaulted.
Acceptable values are 300-8640000. Default value is 28800. When
used to create a row all other values are defaulted.
Since the CLI does not allow this to be set, the XSR will implement
this as read-only.
Acceptable values are active(1), createAndGo(4) and destroy(6).
When used to create a row, all values are defaulted.
Description
The name of an IPSec policy.