Enterasys Security Router X-PeditionTM User Manual page 434

System Alarms and Events
Table A-8 Low Severity Alarms/Events (continued)
Module Message
T1E1 Receive Remote Alarm Indication (Yellow
Alarm).
T1E1 Receive RAI alarm cleared.
T1E1 Receive Alarm Indication Signal (Blue Alarm).
T1E1 Receive AIS cleared.
T1 Cablelength long failed for slot/card/port.
T1 Cablelength short failed for slot/card/port.
T1 Bert start failed for slot/card/port.
T1 Bert profile failed for slot/card/port.
T1 Bert abort failed for slot/card/port.
T1 Clear controller counter failed for slot/card/port.
T1 Load channel failed for slot/card/port:channel.
T1 Unload channel failed for slot/card/port:channel.
T1 Start channel failed for slot/card/port:channel.
T1 Delete channel interface failed for slot/card/
port:channel.
T1 Create channel interface failed for slot/card/
port:channel.
T1 Clock source failed for slot/card/port.
T1 CRC failed for slot/card/port:channel.
T1 FDL failed for slot/card/port.
T1 Framing failed for slot/card/port.
T1 Invert data failed for slot/card/port:channel.
T1 Linecode failed for slot/card/port.
T1 Loopback configuration failed for slot/card/port.
T1 Loopback stop failed for slot/card/port.
T1 Load controller failed for slot/card/port.
T1 Unload controller failed for slot/card/port.
T1 Start controller failed for slot/card/port.
T1 Stop controller failed for slot/card/port.
T1 Bind controller failed for slot/card/port.
T1 Delete controller object failed for slot/card/port.
T1 Create controller object failed for slot/card/port.
SYNC_ Recoverable error
DRIV
A-12 Alarms/Events, System Limits, and Standard ASCII Table
Description
Indicates that T1/E1 physical port is detecting RAI Alarm.
Indicates that T1/E1 physical port is not detecting RAI Alarm.
Indicates that T1/E1 physical port is detecting AIS Alarm.
Indicates that T1/E1 physical port is not detecting AIS Alarm.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Load command sent to driver returned an error.
Unload command sent to driver returned an error.
Start command sent to driver returned an error.
Interface object delete could not be executed.
Interface object create could not be executed.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Configuration command sent to driver returned an error.
Loopback command sent to driver returned an error.
Loopback stop command sent to driver returned an error.
Load command sent to driver returned an error.
Unload command sent to driver returned an error.
Start command sent to driver returned an error.
Stop command sent to driver returned an error.
Bind command sent to driver returned an error.
T1E1 controller object delete could not be executed.
T1E1 controller object create could not be executed.
XSR has a hard recoverable error.