Enterasys Security Router X-PeditionTM User Manual page 429

Table A-6 High Severity Alarms/Events (continued)
Module Message
CLI User: <username> logged in from
address <IP address>
CLI User: <username> logged in from
console
CLI Failed to create CLI session
CLI User: <username> failed to log in from
address <IP address>
CLI Cannot open startup.cfg file! It may have
not been generated yet.
CLI Could not seek to the end of startup.cfg
file! Startup.cfg not restored!
CLI Could not get the size of startup.cfg file!
Startup.cfg not restored!
CLI Could not go to beginning of startup.cfg
file! Startup.cfg not restored!
CLI Could not allocate memory for startup.cfg
file! Startup.cfg not restored!
CLI Could not read startup.cfg! Startup.cfg not
restored!
CLI Startup-config error at line <line number>
CLI Running configuration can not be restored
successfully!
CLI Failed to read CLI configuration files
CLI Line <line #> too long in config file
<configuration file name> Skipping rest of
file...
CLI CLI config mode released by user
<username>
CLI CLI Config mode locked by user
<username>
CLI CLI Config mode locked by startup-config
CLI CLI Config mode released by user
<username>
CLI Cannot delete the Admin
ASYNC_ The ISR could not be connected
IDRIV
ASYNC_ Init string parse failure
IDRIV
Description
Login process failure due to invalid user ID or password
through telnet session in CheckLogin().
Login process failure due to invalid user ID or password
through console session in CheckLogin().
Insufficient memory at this time for data allocation.
The user tries to login to administrator-reserved session
through Telnet and fails due to invalid login ID in
IsUserAdmin().
The user cannot open the startup-config file in
RestoreRunningConfig( ).
Could not move to the end of the startup-config file in
RestoreRunningConfig().
The size of the startup-config file could not be obtained in
RestoreRunningConfig().
In RestoreRunningConfig()
Out of memory in RestoreRunningConfig() during boot process.
Failure reading startup-config during the boot process.
Startup-config encountered an error at the specified line in the
configuration file.
Failure to restore configuration during boot process.
Failure during boot process.
The specific line from startup-config file is too long to be processed
during bootup.
An unknown user exits configuration mode.
Another user has accessed configuration mode and you are trying to
access it.
Configuration mode is locked when the startup-config script finishes
execution.
A user exits Configuration mode.
Occurs when you try to delete the administrator account.
The driver failed to connect the ISR to the BSP, so it will note start.
The driver could not parse the initialization string so it will not start.
System Alarms and Events
XSR User's Guide A-7