Table B-14 etsysSrvcLvlAggrMeasureTable (continued)
Field
etsysSrvcLvlAggrMeasureHistoryOwnerIndex
etsysSrvcLvlAggrMeasureHistoryMetric
etsysSrvcLvlAggrMeasureAdminState
etsysSrvcLvlAggrMeasureMap
etsysSrvcLvlAggrMeasureStatus
BGP v4 MIB Tables
The XSR supports the following BGP v4 tables, whose fields are described in the following pages:
•
General Variables
•
Peer Table
•
Received Path Attribute Table
•
Traps
General Variables Table
Table B-15 General Variables Table
Field
CLI Command
bgpVersion
The vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector.
Versions are identified via the string bits contained within this object.
bgpLocalAs
The local autonomous system number, ranging from 0 to 65535.
bgpIdentifier
The BGP Identifier of local system.
BGP v4 Peer Table
Table B-16 BGP v4 Peer Table
Field
bgpPeerIdentifier
bgpPeerState
Example
1
(Whatever is
shown on the
etsysSrvcLvlNetM
easureTable for
the corresponding
entry)
0
Stop
Network in city A
active
Description
The BGP Identifier of this entry's BGP peer.
The BGP peer connection state including: idle(1), connect(2), active(3),
opensent(4), openconfirm(5), or established(6)
CLI command
Can only be etsysSrvcLvlNetMeasureIndex of the
corresponding entry
Not configurable
[no] rtr schedule Note that this is overwritten by the
status. If status become active, the adminState is
always Start; if status changes from active to
notInService, the adminState is Stop
map - aliased to etsysSrvcLvlNetMeasureMap
Once active, you cannot modify any fields except
deleting the row or setting the status to notInService
BGP v4 MIB Tables
XSR User's Guide B-5