crypto key master generate
2.
Enter
crypto key dsa generate
3.
Enter
When successful, this message will display:
use these keys for authentication
4.
If you wish to connect using SSH, perform the following steps, otherwise skip to Step for
Telnet configuration.
5.
Install a freeware program such as PuTTY on your client device. If you load PuTTY, enable
these options for maximum ease of use:
–
Click Session, Close window on exit, Never. See
–
Click Terminal, Local echo, Force off.
–
Click Terminal, local line editing, Force off.
–
Click Connection, SSH, Don't allocate a pseudo-terminal.
Figure 16-7
PuTTY Exit Option
6.
From the PuTTY Session window, select SSH (port changes to 22), enter the IP address of the
configured XSR interface you wish to connect with, click Load, Open to begin an SSH session
As this is the first time you are connecting to the server, the message shown in
appear. Click NO to start the SSH session.
to create a master key.
to create a host key pair on the XSR.
Keys are generated, new connections will
Figure
16-7.
Figure 16-8
XSR User's Guide 16-7
AAA Services
will
Need help?
Do you have a question about the Security Router X-PeditionTM and is the answer not in the manual?
Questions and answers