Enterasys Security Router X-PeditionTM User Manual page 275

Defines the destination
interface dialer 0
ip address 1.1.1.1 255.255.255.0
encapsulation ppp and other protocol
dialer string 5551000 class remNode1
dialer string 5551000 class remNode2
dialer pool 1
dialer-group 1
map-class dialer
Dialer List 1
describes interesting
packets
interface dialer 1
ip address 2.2.2.2 255.255.255.0
encapsulation ppp and other protocol
ppp multilink over up to 4 B channels
dialer map ip 192.168.1.10 name HOME
dialer pool M
dialer-group 10
The following example adds a dialer pool and group, and two phone numbers to the called node's
Dialer 0 port. It also configures a second dialer pool and group, a Multilink PPP line to four B
channels on the Dialer 1 interface, and maps the 192.168.1.10 network and phone number to BRI
interface 1/0, as well as adds a prioritized pool member and six SPIDs. Finally, the example
configures two more BRI interfaces with prioritized pool members and two SPIDs each. You can
add map class, dialer and access list, BRI, and other protocol commands not shown in the
example.
Note: ISDN BRI can be configured on XSR 1200 Series routers but only on interface
FastEthernet 0:<1-2>.<1-30>. All BRI examples in this chapter reference Ethernet interfaces
on XSR 1800/3000 Series routers.
XSR(config)#interface dialer 0
XSR(config-if<D0>)#ip address 1.1.1.1 255.255.255.0
XSR(config-if<D0>)#encapsulation ppp
XSR(config-if<D0>)#dialer string 5551000 class remNode1
XSR(config-if<D0>)#dialer string 5551000 class remNode2
XSR(config-if<D0>)#dialer pool 1
XSR(config-if<D0>)#dialer-group 1
XSR(config-if<D0>)#no shutdown
Figure 11-1 .Switched BRI Configuration Model
Dialer Profile
commands
Access List
Access List
Access List
Access List
Access List
commands
212555756
interface BRI 1/0
isdn switch-type basic-nil
isdn spid1 0555100001 5551000
priority
isdn spid2 0555300001 5553000
dialer pool-member 1 priority 100
... more BRI commands
interface BRI 1/1
isdn switch-type basic-nil
isdn spid1 0555200001 5552000
priority
isdn spid2 0555400001 5554000
dialer pool-member 1 priority 100
... more BRI commands
interface BRI 1/2
isdn switch-type basic-nil
priority
isdn spid1 0555500001 5555000
isdn spid2 0555700001 5557000
dialer pool-member 1priority 100
... more BRI commands
ISDN Configuration
XSR User's Guide 11-11