Xerox 7700DX - Phaser Color Laser Printer Service Manual page 73

Table 2-2 Service Diagnostics Test Menu Functions (cont'd.)
Test
Clutch Tests
Tests functionality of clutches by activating one clutch at a time.
Take-Away
Clutch
Developer
Clutch
Registration
Clutch
Duplex Clutch
MPT Feed Clutch
Finisher Clutches
Solenoid Tests
Tests functionality of the solenoids by activation one solenoid at a time.
Exit Gate Solenoid
Duplex Gate
Solenoid
Shutter Solenoid
ADC Shutter Open
ADC Shutter Close
MPT Feed Solenoid
Finisher Solenoids
Adjustments/ Calibrations
Performs adjustments, calibrations and operations essential to the performance of the printer.
For details on performing the RegiCon procedures, Registration Control Procedures on
page 4-130
Belt Edge Learn
Front Panel Display
Clutch On
Clutch Off
Clutch On
Clutch Off
Clutch On
Clutch Off
Which Direction?
CCW
CW
Clutch On
Clutch Off
Decurler Cam Clutch
Clutch On
Clutch Off
Solenoid On
Solenoid Off
Solenoid On
Solenoid Off
Solenoid On
Solenoid Off
Solenoid On
Solenoid Off
Solenoid On
Solenoid Off
Solenoid On
Solenoid Off
Set Clamp Paddle
HTrans Gate In Open
HTrans Gate In Close
Phaser 7700 Color Laser Printer Service Manual
Test Operation, Results and
Function
Definition
All tests are activated by pressing
OK.
Listen for the clutch.
Test times out after 1 second.
Engineering use only
Engineering use only
Press OK to run test.
ADC = Automatic Density Correction
Press OK to run test.
ADC = Automatic Density Correction
Press OK to run test.
MPT = Multi-Purpose Tray
Press OK to run test.
Press OK to run test.
Refer to (Processes of the RegiCon
Adjustment on page 4-127).
2-43