RRP 36 Belt Cleaner Assembly
Figure 7-41 Belt Cleaner Assembly
Removal
1.
Open the right cover door.
2.
Open the front cover and lower the main lever.
3.
Lift the Accumulator Belt locking lever and pull the assembly out a few
inches.
4.
Using a 2.5 mm hex driver remove the two screws on the left side of the
belt cleaner assembly.
5.
Remove the belt cleaner assembly.
Replacement
Caution
Never run the printer without the belt cleaner installed or
severe damage to the Accumulator Belt will occur.
Caution
Ensure that the Accumulator Belt is fully inserted or
severe printer damage will result. NEVER FORCE THE
MAIN LEVER!
7-198
Phaser 7700 Color Laser Printer Service Manual
S7700-022